Custom Setting Menus - Ricoh Pentax K-1 Operating Manual

Custom Setting Menus

1 Menu Item
1 EV Steps
2 Sensitivity Steps
3 Meter Operating Time
4 Auto EV Compensation
E1
5 Link AE and AF Point
6 Bulb (B) Mode Options
7 Flash Sync Speed
8 AE-L with AF Locked
9 Viewfinder Light
10 AF with Remote Control
11 Bracketing Order
12 One-Push Bracketing
E2
13 Interval Shooting Options
14 AF in Interval Shooting
30
Function
Sets the adjustment steps for the exposure.
Sets the adjustment steps for the ISO sensitivity.
Sets the meter operating time.
Automatically compensates the exposure when the correct
exposure cannot be achieved with the current settings.
Sets whether to link the exposure value and the AF point in the
focusing area.
Sets the camera operation when 0 is pressed in M mode.
Selects the flash sync speed.
Sets whether to lock the exposure value when the focus is locked.
Sets whether to light up the viewfinder when focusing the subject
or changing the focusing area.
Sets whether to use autofocus when shooting with a remote
control unit.
Sets the order for Bracketing shooting.
Shoots all frames with one release when using Bracketing.
Sets whether to start counting the time of interval from when
exposure starts or when exposure ends for Interval Shooting,
Interval Composite, and Interval Movie Record.
Sets whether to lock the focus position used when the first picture
is taken or perform autofocus for each exposure for Interval
Shooting, Interval Composite, Interval Movie Record,
and Star Stream.
Default Setting Page
1/3 EV Steps p.45
1 EV Step p.49
10sec. –
Off –
Off –
–
Type1
1/200 p.111
Off –
Auto p.17
Off p.58
p.59
0 - +
Off p.59
Interval p.62
Locks focus at
p.62
1st exposure