Ricoh Pentax K-1 Operating Manual page 101

4
Press E.
5
Press F.
The screen of Step 2 reappears.
Repeat Steps 2 to 5.
6
Press F twice.
Setting the One Push File Format
Select the file format to change to when X or Y is pressed
for each [File Format] setting.
1
Set [Fx1 Button] or [Fx2 Button] to [One Push File
Format] in Step 3 of "Setting the Button Operation"
(p.98).
2
Select Z or Y for [Cancel after 1 shot].
The recording format returns to the [File Format]
Z setting of [Image Capture Settings] in the A2 menu
after a picture is taken.
The setting is retained until any of the following
operations is performed:
Y • When X or Y is pressed again
• When 3, F, or G is pressed, or when the
mode dial or main switch is turned
3
Select the file format when
X or Y is pressed.
The left side is the [File Format]
setting and the right side is the
changed file format when X or
Y is pressed.
u Caution
• The One Push File Format function cannot be used when
[Memory Card Options] in the A2 menu is set to [Separate
RAW/JPEG]. (p.43)
For each exposure mode, you can set the functions for when
Q and R are turned and M is pressed.
1
2
3
Fx1 Button Fx1 Button
One Push File Format One Push File Format
Cancel after 1 shot Cancel after 1 shot
Cancel Cancel OK OK
Setting the E-dial Operation
Select [E-Dial Programming] of [Button
Customization] in A5 or C2 menu and press D.
The [E-Dial Programming] screen appears.
Select an exposure mode and press D.
The screen for the selected exposure mode appears.
Press D and use AB
to select the combination
of functions for when
Q and R are turned
and M is pressed.
Change Shutter Speed
I
Change Aperture Value
J
Change Sensitivity
ISO
EV Compensation
e
Return to G Mode
XG
GSHIFT Program Shift
Program Line
GLINE
-- Not available
Exposure Mode Exposure Mode
6
Cancel Cancel OK OK
99