Ae Metering - Ricoh Pentax K-1 Operating Manual

5
Select the Noise Reduction
level for each ISO setting.
Available operations
3
R Shows the next/previous page.
M Resets the Noise Reduction level
to the default setting.
6
Press F.
The screen of Step 3 reappears.
7
Press F twice.
50
High-ISO NR High-ISO NR
1
ISO ISO 100 100
ISO ISO 200 200
Choose the part of the sensor to use for measuring brightness
ISO ISO 400 400
ISO ISO 800 800 and determining the exposure.
ISO ISO 1600 1600
ISO ISO 3200 3200
1
ISO ISO 6400 6400
Reset Reset
t Memo
• The metering method can also be set in [AE Metering]

AE Metering

Turn R while pressing
2.
Meters the brightness in multiple different
Multi- zones of the sensor.
A
segment In backlit conditions, this mode
automatically adjusts the exposure.
Meters the brightness with an emphasis
on the center of the sensor.
Center-
B The sensitivity increases at the center
weighted
and no automatic adjustment is performed
even in backlit conditions.
Meters the brightness only within a limited
C Spot area at the center of the sensor.
Useful when the subject is small.
of the A1 and C1 menus.
A1/C1
5.6 5.6
2 5 0 2 5 0
1/ 1/ F F
1 6 0 0 1 6 0 0
99999 99999
99999 99999