Clearing Route Table Entries - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide
2. Use the IP address 0.0.0.0 with the ip route command in global Configuration
Route Source
Enhanced IGRP external route
Enhanced IGRP summary route
External BGP
IGRP
IGRP external route
Internal BGP
Internal Enhanced IGRP
OSPF
RIP
Static route
Unknown

Clearing Route Table Entries

Use the clear ip route command in Privileged EXEC mode to clear dynamic entries
from the routing table. You must specify the IP address of the routes and the mask of
the IP address.
5-14
where:
A.B.C.D is the static route destination IP address.
A.B.C.D is the static route destination IP address mask.
A.B.C.D is the forwarding router's IP address.
null 0-0 is null interface and port.
tag 1-4294967295 specifies the match value used to control the route-map
redistribution.
mode to set a default route:
MOT (config)#ip route 0.0.0.0 0.0.0.0 198.56.0.2
Use the no ip route command to remove a static route from the routing table.
Table 5-2 lists the dynamic routing protocols and their default distances.
Table 5-2 Route Sources and Administrative Distances
Default Distance
170
5
20
100
170
200
90
110
120
1
255
MGBI
Release 1.0
526360-001-00 Rev. B