Associating Groups To Mib Views; Configuring An Snmp Context - Motorola BSR 2000 Configuration And Management Manual

Release 1.0

Associating Groups to MIB Views

You can associate an SNMP Group to specific SNMP MIB views. This restricts
access to the MIB objects defined in the view to the SNMP Group, limiting which
MIB objects an SNMP manager can access.
Use the snmp-server access command in Global Configuration mode to map SNMP
Groups to SNMP MIB views.
MOT (config)#snmp-server access <group-name> {v1 | v2c | v3 noauth | v3 auth
| v3 priv} [prefix <>] [match exact | match prefix] [read <new-MIB-view-name>]
[write <new-MIB-view-name>] [notify <new-MIB-view-name>]
Example
MOT
<new-MIB-view-name>

Configuring an SNMP Context

An SNMP Context is a collection of managed object resources that an SNMPv2 entity
can access. Configuring a context record as part of an access policy further restricts
access to MIB views. The object resources identified by a context are either local or
remote. An SNMP Context that refers to local object resources is identified as a MIB
view. The SNMP entity uses local mechanisms to access the management information
identified by the context.
1. To create or update a context record, use the snmp-server context command in
2. Use the no snmp-server context command to remove the specified SNMP
Note: You must configure a context in conjunction with configuring an access
policy. If a prefix name is configured with the snmp-server access
command, it should have the same name as the context.
Note: If you do not specify a prefix name with the snmp-server access
command, you must add a blank context such as snmp-server context.
526360-001-00 Rev. B
(config)#snmp-server access <group-name> v3 auth write
Global Configuration mode.
MOT (config)#snmp-server context <context-name>
Context.
MGBI
Configuring SNMP
4-31