Speakers - HP Stream x360 Maintenance And Service Manual

Speakers

Description
Speakers (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the TouchScreen board cable (2) from the routing channel built into the speaker.
3. Release the wireless antenna cables from the retention clips (3) and routing channel built into
the speaker.
4. Remove the two Phillips PM2.5×4.3 screws (4) that secure the speakers to the keyboard/top cover.
5. Remove the speakers (5).
Reverse this procedure to install the speakers.
42 Chapter 5 Removal and replacement procedures
Bottom cover on page 28).
Battery on page 30).
Spare part number
906785-001