Rtc Battery - HP Stream x360 Maintenance And Service Manual

RTC battery

Description
RTC battery (includes cable and double-sided adhesive)
Before removing the RTC battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the system board.
2. Detach the RTC battery (2) from the keyboard/top cover. (The RTC battery is attached to the keyboard/
top cover with double-sided adhesive.)
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.
Bottom cover on page 28).
Battery on page 30).
Component replacement procedures
Spare part number
818125-001
37