Section 3 - Configuration; Overview - Honeywell UDC3300 Product Manual

3.1

Overview

Introduction
What's in this
section?
Prompts
1/01
Section 3 – Configuration
Configuration is a dedicated operation where you use straightforward
keystroke sequences to select and establish (configure) pertinent control
data best suited for your application.
The table below lists the topics that are covered in this section.
3.1 Overview
3.2 Prompt Hierarchy
3.3 How to Get Started
3.4 Configuration Tips
3.5 Configuration Procedure
3.6 Lockout Setup Groups
3.7 Limit Set up Group
3.8 Input 1 Setup Group
3.9 Communications Setup Group
3.10 Alarms Setup Group
3.11 Calibration Setup Group
3.12 Status Set up Group
3.13 Configuration Record Sheet
To assist you in the configuration process, there are prompts that appear in
the upper and lower displays. These prompts let you know what group of
configuration data (Set Up prompts) you are working with and also, the
specific parameters (Function prompts) associated with each group.
Figure 3-1 shows you an overview of the prompt hierarchy.
As you will see, the configuration data is divided into 5 main Set Up
groups plus prompts for calibration and prompts that show the status of
the continuous background tests that are being performed.
UDC3300 Limit Controller Product Manual
Topic See Page
19
20
21
22
23
25
26
27
29
30
31
31
32
Continued on next page
19