Installation Components Diagram; Assembly Steps; Installing The Stand-Offs - Regency Z2510L Owners & Installation Manual

Warmhearth fireplace
Hide thumbs Also See for Z2510L:
Table of Contents

Advertisement

INSTALLATION
BEFORE YOU START
Check your inventory list to be sure you have all the necessary parts supplied in good usable
condition. Check for any concealed damage. Check the operation of the combustion air damper.
When the damper is in the fully closed position, the damper handle should be to the right. When
damper is in the fully open position, the damper handle must be in the left position.
10
Installation Components

ASSEMBLY STEPS

Note: The following steps represent the
normal sequence of
Each installation is unique, howev-
er, and might
require
steps. Each step is dealt with in
detail in the following pages.
1) Install stand-offs and insulation strip to the
unit. See Page 10.
2) Complete Framing for the WarmHearth. See
Pages 7 to 9.
IMPORTANT: Remove all gold acces-
sories such as door, louvers while
installing to avoid marking.
Position firebox prior to framing or into
prepared framing. See Page 8.
3) Install the chimney system. See Pages 9 to
10.
4) Install outside combustion air kit. See Page
13.
5) Hook-up the Wiring. See Page 13.
6) Install the Blowers. See Pages 13 to 14.
7) Gravity Air Feed Option. See Page 14.
8) Install Central Heat Kit, if applicable. See
Pages 15 to 16.
9) Complete finish wall material, surround and
hearth extension to your individual taste.
See Pages
17 to 18.
10) Position masonry liner/bricks and ceramic
fiber insulation in the unit.
louvers, glass, door, spring handles. See
Page 19.
INSTALLING THE
STAND-OFFS
Stand-offs are installed to provide reduced
temperatures and proper clearances for the
safe installation of your product. They consist
of four 1 in. stand-offs on the back, two 2 in.
stand-offs on each side and one 6 in. stand-off
on the top of the unit.
Attach these stand-offs where indicated in the
pre-drilled holes on the unit body.
IMPORTANT: It is absolutely neces-
sary to attach stand-offs to the unit
to avoid combustion problems.
Serious overheating of combusti-
ble framing and possible fire may
Regency Z2510 WarmHearth
installation.
different
Attach gold

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents