Boot Features Submenu - HP ProLiant ML110 G6 Maintenance And Service Manual

Boot Features submenu

Field
Embedded VGA Control
Splash Screen
NumLock
POST F1 Prompt
Restore After AC Power
Loss
Splash Screen
Description
Select the status of the embedded graphics controller when an
external VGA card is installed.
•
Auto Detect – Disable the embedded graphics controller
when an external VGA card is installed.
•
Always Enabled – The embedded graphics controller remains
the primary controller even if an external VGA card is
installed.
Enable this option to display the splash screen prior to loading
the operating system. Disabling this option speeds up the boot
process
Select the NumLock state when the server is powered on.
•
Enabled – NumLock is on.
•
Disabled – NumLock is off.
•
Auto – The NumLock state will be the same as it was when
the server was last powered off.
Select what action to take when a POST error occurs during
bootup.
•
Delayed – The system pauses for about 5 seconds and then
continues booting up.
•
Enabled – The system pauses and will only continue booting
up when the F1 key is pressed.
•
Disabled – The system ignores any POST errors during
bootup.
Select the power state when an AC power loss occurs.
•
Off – The server remains off until the power button is pressed.
•
Last State – The server reverts to the last power state before
the power loss occurred.
•
On – The server switches back on after the AC power loss.
Enable this option to display the splash screen during bootup.
Options
Auto Detect
Always Enabled
Enabled
Disabled
Enabled
Disabled
Auto
Delayed
Enabled
Disabled
Off
Last State
On
Enabled
Disabled
Diagnostics tools 74