HP ProLiant ML110 G6 Maintenance And Service Manual page 52

Identify the slot that is compatible with the expansion board you intend to install, and then
c.
pull out its slot cover (3).
Store it for reassembly later.
CAUTION: Do not discard the slot cover. If the expansion board is removed in the future,
the slot cover must be reinstalled to maintain proper cooling
Remove the expansion board from its protective packaging, handling it by the edges.
3.
Install the expansion board.
4.
Slide the expansion board into the selected slot, and then press it down to seat it
a.
properly (1).
Slide the expansion slot cover retainer toward the slots covers (2).
b.
Tighten the expansion slot cover retainer thumbscrew (3).
c.
Removal and replacement procedures 52