HP ProLiant ML110 G6 Maintenance And Service Manual page 81

Hard Disk Configuration submenu
Field
SATA Mode Selection
Drive Write Cache
SATA Port 0–5
Description
Select whether to enable the Advanced Host Controller Interface
(AHCI) function of the SATA controller.
•
Enhanced – The SATA controller enables AHCI. The RAID
function (if available) will also be enabled. The RAID setup
utility will be accessible during boo-up.
•
Compatible – The SATA controller disables both AHCI and
RAID functions and runs in the IDE emulation mode.
Note: For operating systems that do not have native AHCI
support, install the proper device driver first before enabling
AHCI.
Select whether to enable write caching for the installed hard
drive(s). When enabled, the disk system can acknowledge a
write operation as soon as the data is in the cache, not waiting
for the data to be physically written.
Caution: Write caching improves disk performance, but a power
outage or equipment failure might result in data loss or
corruption.
Press Enter to display the individual configuration screen of installed SATA drive(s).
Options
Compatible
Enhanced
Enabled
Disabled
Diagnostics tools 81