Siemens SIMATIC S5 Manual page 8

Introduction
• Electronic Feed Drives for Machine Tools
Hans Groß
Order No.: ISBN
Conventions
To improve readability, the manual has been broken down into menus, i. e.:
• Each section has a thumb index.
• At the beginning of the manual you will find an overview of section headers.
• Each section is preceded by a detailed breakdown of its contents.
Each section has a three-level breakdown. Headers in bold type are used for
further subdivisioning.
• Pages, figures and tables are numbered separately in each section. A list of
the tables and figures in each section can be found on the flip side of the
breakdown for that section.
Certain forms of expression have been used in the manual with which you should
become acquainted before continuing.
• Characteristic abbreviations have been used for a number of terms. Each
abbreviation is explained in detail the first time it appears in the manual.
Example: Programmable controller (PLC)
• Cross-references are shown as follows: ("see Section 4.3.2)" refers you to
Section 4.3.2.
There are no page references.
• An arrow ( ) is used to indicate an action you must take.
• The response to an action is designated by the symbol .
x
3-8009-1338-0
IP 266
EWA 4NEB 812 6057-02