Information - Siemens SIMATIC S5 Manual

Fundamentals of COM 266
Header:
The header contains the following information:
• Screen form name:
• Name of the software package:
• "DEVICE" field
The contents of this field depend on which key you press to start the
function (i. e. <F1>, <F2> or <F3>).
Data area:
Until you have selected a device, no filenames are displayed in the data area and
the cursor is set to the screen form's only input field.
Choose between MACHINING PROGRAM and MACHINEDATA.
The portion of the screen form beneath the line
Name Length Name Length Name Length Name Length
is not filled in until the device has been selected.
Example:
Press <F7> in the "FUNCTION SELECT" menu to invoke the Information
function.
The text MACHINEDATA is displayed in the 'Data block' field. Press <F3> to
select a disk drive (FD) as source.
All data blocks on the source device that contain machine data are listed in
the data area.
You specified the disk drive in the "PRESETS" form.
6-74

INFORMATION

I N F O R M A T I O N
SIMATIC S5/COM 266
EWA 4NEB 812 6057-02
IP 266