Hierarchical Structure Of Com 266 - Siemens SIMATIC S5 Manual

Fundamentals of COM 266
6.3

Hierarchical Structure of COM 266

The Figure below illustrates the hierarchical structure of COM 266. The diagram
shows the names of all screen forms; forms for which there are subordinate
screen forms are outlined in bold type.
Functions or additional screen forms are invoked via the function keys (see
Figure 6-6).
PRESETS
FUNCTION SELECT
F1 F2 F3 F4 F5 F6 F7 F8
Figure 6-6. Hierarchical Structure of the "FUNCTION SELECT" Menu
and Subsequent Screen Forms
And what now?
Now you must decide which function you want to select.
If you have just installed the module, start with the "INPUT" function. This
function is invoked by pressing function key <F1>. You will find detailed
information on the screen forms in this group in the next section.
If the machine data and traversing programs have already been stored on the
module, you can press <F3> to invoke the "Test" function (see Section 6.6).
At this point, however, you should learn how to enter machine data.
6-14
F8
INFORMATION
F7
DELETE
F5
TRANSFER
F4
TEST
F3
OUTPUT
F2
INPUT
F1
F1 F2 F3 F4 F5 F6 F7 F8
EWA 4NEB 812 6057-02
IP 266