Factory Reset; Help/Setup Language (Quick Switch); Alerts; Contact Toro - Toro EVOLUTION User Manual

Factory Reset

Select this function to reset the controller to the factory default parameters. Schedule B, C and Auxiliary will be disabled and all of their
parameters will be cleared or set to OFF. Schedule A will be set with a WEEKDAY schedule with all 7 days active. It will have one start time
set to OFF and all valve runtimes set to OFF.
FACTORY RESET
RESET TO FACTORY
DEFAULTS? YES
Help/Setup
Language
®
e EVOLUTION AG controller provides a quick way to switch the user interface from English to Spanish. Select LANGUAGE and
press SELECT to quickly switch.
Note: When another language other than English is selected in the LANGUAGE menu inside PREFERENCES, that language and
English will become the selection.

Alerts

®
e EVOLUTION AG controller always checks the system for proper function and it will provide feedback if it detects any system
abnormality. e Alerts menu allows you to view and clear detected system faults.
Alert Listings
®
Short - e EVOLUTION AG controller
Overcurrent - e EVOLUTION
combinations of terminals exceeded the recommended current draw rating.
Low Battery - e EVOLUTION
is cleared, it will not display again unless a Factory Reset is performed or the newly installed battery runs low again.
Low A/C Power - e EVOLUTION
Communication Error - e EVOLUTION
Clearing an Alert
You can clear an Alert individually or use the CLEAR ALL command to erase them all.
Step 1 – Press HELP/SETUP.
Step 2 – Use the Up or Down
Step 3 – Use the Up or Down
ALERTS
CLEAR ALL
LOW BATTERY
Step 4 – Use the Up or Down

Contact Toro

Access Contact Toro to get the latest contact information.
Step 1 – Press HELP/SETUP.
– Use the Up or Down
Step 2
TORO
US +1(800)367-8676
TORO.COM/EVOLUTION
FOR GLOBAL SUPPORT
SEND EMAIL TO
EVOLUTION@TORO.COM
26
detected a short in the valve.
®
AG controller detected an over current in the valve. Over current occurs when a terminal or
® AG controller
detected no battery installed or the battery's power is low. Once the Low Battery alert
®
AG controller detected low or no A/C power.
®
AG controller encountered a communication error with the output valves.
arrows to select the Alerts. Press SELECT
arrows to select individual alerts or CLEAR ALL. Press SELECT
arrows to con rm (Yes) or cancel (No). Press SELECT
arrows to select the Alerts. Press SELECT
e date and time of the alert is noted.
.
.
.
.