Set Time/Date; Load From Usb - Toro EVOLUTION User Manual

Set Time/Date

Step 1 – Press the HELP/SETUP button.
Step 2 – Use the Up or Down
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE

LOAD FROM USB

SAVE TO USB
Step 3 – Use the Up or Down
Right arrow or SELECT
Step 4 – Use the Up or Down
Month and Year for International Format).
SET TIME/DATE
TIME 11:25AM
DATE 05/01/13
Step 5 – Press SELECT to save the changes.
Load From USB
Load from USB function is used to retrieve schedules saved in a USB Flash drive.
Note: Although many USB ash drives may function well with the EVOLUTION
are recommended:
• USB Version 2.0 Compliant
• 1–8 GB Memory Size (Smaller memory size will perform faster.)
• FAT32 File System with 1 Logical Partition
Step 1 – Plug your USB Flash drive into the EVOLUTION
See Figure 2 on page 2.
Step 2 – Press the HELP/SETUP button.
Step 3 – Use the Up or Down
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
®
e EVOLUTION
desired schedule. Use the Right
Step 4 – Use the Up or Down
LOAD FROM USB
ARE YOU SURE? YES
arrows to navigate to SET TIME/DATE. Press SELECT
arrows to select TIME or DATE. Navigate to the TIME or DATE parameters using the
.
arrows to modify the TIME's Hour and Minutes or the DATE's Month, Day and Year (Day,
®
AG controller's USB port located at the back of the control panel.
arrows to navigate to LOAD FROM USB. Press SELECT
AG controller will list all available schedule les. Use the Up
arrow or SELECT
arrow to select YES from the con rmation window.
.
®
AG controller, the following USB speci cations
or Down
to load the schedule.
.
arrows to navigate to the
27