Datamax E-class E-3202 Programmer's Manual page 18

Printer status
Bit On/Off Hex Decimal
0 Off 00 0 Not used, Fixed to off
1 Off 00 0 Not used, Fixed to off
2 Off 00 0 Drawer kick out connector pin 3 is low
2 On 04 4 Drawer kick out connector pin 3 is high
3 Off 00 0 On line
3 On 08 8 Off line
4 On 10 16 Not used. Fixed to on
5-6 - - - Not defined
7 Off 00 0 Not used. Fixed to off
Off line status
Bit On/Off Hex Decimal
0 Off 00 0 Not used, Fixed to off
1 On 02 2 Not used, fixed to on
2 Off 00 0 Cover closed
2 On 04 4 Cover Open
3 Off 00 0 Paper is not being fed by the paper
feed button
3 On 08 8 Paper is being fed by the paper feed
button
4 On 10 16 Not used. Fixed to on
5 Off 00 0 No paper end stop
5 On 20 32 Printing stops due to paper end
6 Off 00 0 No error
6 On 40 64 Error
7 Off 00 0 Not used, Fixed to off
Error status
Bit On/Off Hex Decimal
0 Off 00 0 Not used, Fixed to off
1 On 02 2 Not used, fixed to on
2 - - - Undefined
3 Off 00 0 No auto-cutter error
3 On 08 8 Auto cutter error
4 On 10 16 Not used. Fixed to on
5 Off 00 0 Not unrecoverable error
5 On 20 32 Unrecoverable error
6 Off 00 0 Not automatically recoverable error
6 On 40 64 Automatically recoverable error
7 Off 00 0 Not used. Fixed to off
Note: The E-3202 is not available with an "auto-cutter".
Paper roll sensor status
Bit On/Off Hex Decimal
0 Off 00 0 Not used, Fixed to off
1 On 02 2 Not used, fixed to on
2-3 Off 00 0 Paper roll near-end sensor : paper
adequate
2-3 On 0C 12 Paper roll near-end sensor : near end
4 On 10 16 Not used. Fixed to on
5-6 Off 00 0 Paper roll end sensor : paper present
5-6 On 60 96 Paper roll end sensor : paper not
present
7 Off 00 0 Not used. Fixed to off
E-3202 Programmer's Manual
Function
Function
Function
Function
13