Datamax E-class E-3202 Programmer's Manual page 29

Hide thumbs Also See for E-class E-3202:

Table of Contents

Below is a sample program and the printout it will create:

←@↔! ←a-Datamax Corporation

Matt & Derek

European Tech Support

Feb 2000

DMX-E-3202

POS/Label Printer

ESC/POS Print Examples↔!2↔B-←a

Reverse Text

↔B ↔LD ↔H2↔kCE750224523908

*Commands in this sample with a

character in it, is actually a NUL value.

Please note that there is no carriage return after each command. The reason being that when we program this printer,

every time you press the ENTER key the program will remember this as a carriage return. It will follow on to the next

line.

Initializing the printer.

The command ESC @ is used for this. To be able to access this command in EDIT we use the following procedure. Ctrl

P (at the bottom of the EDIT screen the following command will appear "Enter the control Key to insert"

Next we press Esc key, on the screen the character ← will appear. Follow this character with the @ (can be done by key

pad and Alt 64). The printer is now initialized.

*Ctrl P to be able to insert control key

E-3202 Programmer's Manual

Table of Contents