Datamax E-class E-3202 Programmer's Manual page 33

Selecting the left margin
GS L nL nH
If we would like to move the barcode to a position on the label we will use this command. Please note that nH will always
be a NUL value. Where nL is the value that moves the barcode to the right when increased.
Selecting position for HRI
GS H n
This command selects the printing position of the Human Readable characters for the barcode. The values are from 0 to 3
or 48 to 51.The selection for pint position is as follows:
n Print position
0,48 Not printed
1,49 Above the barcode
2,50 Below the barcode
3,51 Both above and below the barcode
Printing the barcode.
GS k m n data...
m Barcode
65 UPC-A
66 UPC-E
67 EAN 13
68 EAN 8
69 Code 39
70 ITF
71 Codabar
73 Code128
In this sample we will create an EAN 13 Barcode.
GS k (67) (12) ( data.. )
↔k( Alt 67 ) ( Ctrl+P Alt 12 ) (750224523908)
↔kCE750224523908
28
Number of character
10
10
<12
7
Variable Length
Variable even Length
Variable Length
Variable Length
E-3202 Programmer's Manual