Datamax E-class E-3202 Programmer's Manual page 32

In the next command we will select a new font size using the GS !
For more information on this command refer back to Selecting character size. We set the size to a width of 4 and a height
3. That will give us a Dec W of 48 and a Dec H of 2.
↔!(Dec W+Dec H)
↔!(48+2)
↔!(n=Dec value of 50)
↔!( Alt 50 )
The command should come out as: ↔!2
2
is the ASCII Character for the Decimal value 50. Refer to ASCII Table for information on characters.
*NOTE: This command follows up on previous command is entered without any carriage returns. See below for
sample:
←@↔! ←a-Datamax Corporation
Matt & Derek
European Tech Support
Feb 2000
DMX-E-3202
POS/Label Printer
ESC/POS Print Examples↔!2
White/black reverse Printing
GS B n
On: n=1
Off: n=0
The default setting is 0. This mode is turned on before the text you would like to be reversed and the turned off after the
text.
↔B-
The command is turned on
↔B
The command is turned off
∗ This is only to show that there should be a NUL value in the command. In
order to create the NUL value we use Ctrl+Shift+2
the keyboard and not the number pad)
one character to the right without anything displayed on the screen. If you
were to do a Hex Dump you will see a 00 Value.
E-3202 Programmer's Manual
, (using the '2' from the top of
. The cursor on the screen should move
27