Table of Contents
Advertisement
ENGLISH
50
Ready Signals (Green Colour)
Warning Signals (Yellow Colour)
The machine is programming the amount of co ee to be brewed.
Co ee brewing using pre-ground co ee in progress.
The machine is heating up to brew beverages or dispense hot water.
The machine is heating up during beverages programming.
The machine performs the rinsing cycle. Wait until the machine has com-
pleted the cycle.
The machine needs the "INTENZA+" water lter to be replaced.
The brew group is being reset due to machine reset.
Re ll the co ee bean hopper with co ee beans and restart the cycle.
Prime the circuit.
The machine needs to be descaled. Press the "
ing menu. Follow the steps described in the descaling chapter of this manual.
If you want to descale later, press the
chine.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
" button to enter the descal-
"
" button to continue using the ma-
Advertisement
Table of Contents
