Table of Contents
Advertisement
2
Press the "
" button to start the cycle. The machine starts the auto-
matic priming of the circuit by dispensing some water through the
steam wand.
3
The bar under the icon shows the operation progress. When the pro-
cess is complete, the machine stops dispensing automatically.
4
Then the display shows the machine warm-up icon.
Automatic rinse/self-cleaning cycle
When warm-up is completed, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1
Place a container under the co ee dispensing spout to catch the small
amount of water which will be dispensed.
2
The machine shows this display. Wait for the cycle to nish automati-
cally.
Note:
You can stop dispensing by pressing the "
3
When the above steps have been completed, the machine shows this
display.
ENGLISH
" button.
11
11
Advertisement
Table of Contents
