Adjusting the co ee length
The machine allows you to adjust the amount of brewed co ee according
to your taste and/or the size of your cups.
Each time the "
" or "
" button is pressed, the machine brews a pre-set
amount of co ee. Each button may be individually programmed for a
speci c brew setting.
The following procedure describes the programming of the "
1
Place a cup under the dispensing spout.
2
Press and hold the "
" button until the "MEMO"icon is displayed.
Then release the button. The machine is now programming.
The machine starts brewing co ee.
3
When the "STOP"icon is displayed, press the "
the desired amount of co ee is reached.
Now the "
" button is programmed; each time it is pressed, the machine
will brew the same amount of espresso that was just programmed.
Note:
to program the "
" brew button, the same steps should be followed. You
should always use the "
" button to stop brewing co ee when the desired
amount of co ee is reached even when you are programming the "
button.
ENGLISH
21
21
" button.
" button as soon as
" brew