Table of Contents
Advertisement
ENGLISH
16
4
Insert the lter into the empty water tank. Press it until it cannot move
further down.
5
Fill the water tank with fresh water and reinsert it into the machine.
6
Dispense the entire water tank by using the hot water function (see
chapter "Hot water dispensing").
7
Fill the water tank again.
8
Press the "
" button and scroll the pages by pressing the "
ton until the following screen is displayed.
9
Press the "
" button to select "ON" and press the "
con rm.
10
To exit, press the "
" button. The machine shows this display and is
ready to brew.
In this way the machine has been programmed to inform the user of the
need to replace the "INTENZA+" water lter.
Replacing the "INTENZA+" water lter
When the "INTENZA+" water lter needs to be replaced with a new one, the
following icon is displayed.
1
Replace the lter as described in the previous chapter.
" but-
" button to
Advertisement
Table of Contents
