Safety And Operating Decals - Generac Power Systems MLT6SMD Owner's Manual

Introduction and Safety

Safety and Operating Decals

See Figure 1-1 through
numerous safety and operating decals. These decals
provide important operating instructions and warn of
dangers and hazards. The following diagrams illustrate
decal locations and descriptions.
ID Description
1 Stowed Position
2 Warning—Do Not Retract Outriggers With Tower Up
3 Notice—Avoid Tangling Winch Cable
4 Electric Shock Hazard
5 Lifting Point
6 Forklift and Tie-Down Point
7 Owner's Manual Location
8 Engine Operation
9 Danger—Fuel and Fueling Hazards
10 Ultra Low Sulfur Diesel Fuel Only
11 Not A Step
12 Tie-Down Point
13 Towing Instructions
8
Figure 1-3. This unit features Replace any missing or hard-to-read decals and use care
when washing or cleaning the unit. Decal part numbers
can be found
www.generacmobileproducts.com.
ID Description
14 Safety Alert—Read Owner's Manual
15 Warning—Electrical Storms and High Wind
16 Danger—Do Not Operate Beneath Electrical Wires,
In Electrical Storms, or In High Winds.
Read Owner's Manual. Do Not Tow With Mast Raised.
17 Warning—Hot Surface
18 Warning—Pressurized Liquid
19 Disconnect Battery Before Servicing
20 Warning—Do Not Remove Guard. Hot Surface,
Entanglement, and Cutting Hazards.
21 Warning—Cutting Hazard
22 Warning—High Temperature: Do Not Remove Guard
23 Electrical Ground Connection
24 Neutral Bonded to Frame
25 Setup and Take-Down Instructions
— —
Owner's Manual for MLT6SMD Light Tower
in the parts manual at