Section 1: Introduction And Safety; Introduction; Read This Manual Thoroughly; Safety Rules - Generac Power Systems MLT6SMD Owner's Manual

Section 1: Introduction and Safety

Introduction

Thank you for purchasing a Generac Mobile Products, LLC
product. This unit has been designed to provide high-
performance, efficient operation, and years of use when
maintained correctly.
The information in this manual is accurate based on prod-
ucts produced at the time of publication. The manufacturer
reserves the right to make technical updates, corrections,
and product revisions at any time without notice.

Read This Manual Thoroughly

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
If any section of the manual is not understood, contact your
nearest GMP ASD, or contact Generac Mobile Products
Technical Service at
www.generacmobileproducts.com
concerns.
The owner is responsible for proper maintenance and safe
use of the equipment. Comply with regulations the Occu-
pational Safety and Health Administration (OSHA) has
established, or with equivalent standards. Also, verify the
unit is applied, used, and maintained in accordance with
the manufacturer's instructions and recommendations. Do
nothing to alter safe application/usage and render the unit
in noncompliance with the aforementioned codes, stan-
dards, laws, and regulations.
Save these instructions for future reference. This manual
contains important instructions for the unit to be followed
during setup, operation and maintenance of the unit and
battery. ALWAYS supply this manual to any individual that
will use this machine.

Safety Rules

The manufacturer cannot anticipate every possible circum-
stance that might involve a hazard. The alerts in this
manual, and on tags and decals affixed to the unit, are not
all inclusive. If using a procedure, work method, or oper-
ating technique that the manufacturer does not specifically
recommend, verify that it is safe for others and does not
render the equipment unsafe.
Throughout this publication, and on tags and decals affixed
to the unit, DANGER, WARNING, CAUTION, and NOTE
blocks are used to alert personnel to special instructions
about a particular operation that may be hazardous if
performed incorrectly or carelessly. Observe them
Owner's Manual for MLT6SMD Light Tower
(000100a)
1-800-926-9768 or visit
with any questions or
carefully. Alert definitions are as follows:
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTE: Notes contain additional information important to
a procedure and will be found within the regular text of
this manual.
These safety alerts cannot eliminate the hazards that they
indicate. Common sense and strict compliance with the
special instructions while performing the action or service
are essential to preventing accidents.

How to Obtain Service

When the unit requires servicing or repairs, contact a
Generac Mobile Products Authorized Dealer for assistance.
Service technicians are factory-trained and are capable of
handling all service needs. For assistance locating a dealer,
go to www.generacmobileproducts.com/parts-service/
find-service. When contacting a GMP ASD about parts
and service, always supply the complete model number
and serial number of the unit as given on its data decal
located on the unit. Record the model number and serial
numbers in the spaces provided on the inside front cover
of this manual.
Introduction and Safety
(000001)
(000002)
(000003)
1