The Functions; Basic Procedure In The Function Display - Yamaha PSR-E463 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters such as
Tuning, Split Point, Voices and Effects. Find the desired item in the Function List on
pages 66–69, and then follow the instructions below.
Basic Procedure in the Function
Display
1
Press the [FUNCTION] button.
2
Press the CATEGORY [<<] and [>>] but-
ton several times until the desired item
appears.
3
Use the dial, the [+/YES] and [-/NO] but-
tons, or the [0]–[9] number buttons to set
the value of the selected function.
To restore the default value, press the [+/YES] and [-
/NO] buttons simultaneously. The one exception to
Function List
Function Number
Function
PSR- PSR-
E463 EW410
Volume
001 001 Style Volume
002 002 Song Volume
003 003 Groove Volume
[AUX IN] Audio
004 004
Volume
[USB TO DEVICE]
005 005 [USB TO HOST]
Audio Volume
Overall
006 006 Transpose
007 007 Tuning
008 008 Pitch Bend Range
009 009 Split Point
010 010 Touch Response
66
PSR-E463/PSR-EW410 Owner's Manual
Current item
SplitPnt
009
054
Current Function
number
Display Range/Settings
StyleVol 000–127
SongVol 000–127
GroovVol
000–127
AuxInVol 000–127
USBInVol
000–127
Transpos -12–12
Tuning 427.0Hz–453.0Hz
PBRange
01–12
036–096 (C1–C6;
PSR-E463)/
SplitPnt
028–103 (E0–G6;
PSR-EW410)
1 (Soft), 2 (Medium),
TouchRes
3 (Hard), 4 (Fixed)
this is the MIDI Initial Send function (Function 055),
which is an operation and not a parameter. For this
function, pressing the [+/YES] button executes the
operation while pressing [-/NO] cancels it.
Direct numeric entry
• Decrement
value by 1
• Cancel
Some Function settings are maintained even if
you turn off the power, and can be transferred to
a computer as Backup Data (page 49).
NOTE
• To exit from a Function display, press the [VOICE],
[STYLE], [SONG] or [GROOVE CREATOR] button.
Default
Value
100 Refer to page 62.
100 Refer to page 65.
100 Refer to page 62.
Adjusts the volume of audio playback that is input from
50
the [AUX IN] jack (pages 32, 46).
Adjusts the volume of audio playback that is input from
100 the [USB TO DEVICE] and [USB TO HOST] terminal
(pages 32, 46).
00 Refer to page 51.
440.0Hz Refer to page 51.
Sets the range over which you can control pitch by using
02 the [PITCH BEND] wheel (page 51), in semitone incre-
ments.
054 (F#2) Refer to page 62.
2 (Medium) Refer to page 52.
Press simultane- • Increment
ously to recall the value by 1
default setting. • Execute
Description