Changing The Harmony And Arpeggio Types; Adjusting The Harmony Volume - Yamaha PSR-E463 Owner's Manual

NOTE
• When Split (page 21) is on, Arpeggio is applied only to
the Split Voice. When Split is off, Arpeggio is applied to
the Main and Dual Voices. Arpeggio cannot be applied to
the Split and Main/Dual Voices simultaneously.
• Selecting a Voice number between 292 and 301 will turn
on Split automatically, as well as Arpeggio. When one of
those Voices is selected, Arpeggio is applied only to the
Split Voice and is triggered only by playing a key to the
left of the Split Point.
• By assigning the Arpeggio Hold function to the foot-
switch, the Arpeggio will continue to play after the note is
released (page 68).
Playing each Harmony Type
• Harmony types 01 to 05
Press the right-hand keys while playing chords in
the Auto Accompaniment area of the keyboard
when ACMP is on (page 26).
• Harmony types 06 to 12 (Trill)
• Harmony types 13 to 19 (Tremolo)
• Harmony types 20 to 26 (Echo)
Hold down two keys.
Keep holding down
the keys.
Play the keys.
Try Playing a Variety of Instrument Voices
Changing the Harmony and
Arpeggio types
1
Hold down the [HARMONY/ARPEGGIO]
button for longer than a second.
After "Harm/Arp" (Function 041) appears on the
display, the current Harmony type or Arpeggio
type appears.
Hold for longer
than a second.
2
Rotate the dial to select the desired Har-
mony type or Arpeggio type.
NOTE
• 001 to 026 are Harmony types. 027 to 176 are Arpeggio
types. Refer to the Harmony Type List / Arpeggio Type
List on web material Data List.
• When playing one of the Arpeggio types 143 or later,
select a Drum Kit (Voice No.238–261) as the Main Voice.

Adjusting the Harmony Volume

You can adjust the Harmony volume in the Function
Settings (page 68, Function 042).
Adjusting the Arpeggio Velocity
You can adjust the Arpeggio velocity in the Function
Setting (page 68, Function 043).
PSR-E463/PSR-EW410 Owner's Manual
Harm/Arp
041
Trio
041
002
Current Harmony type or
Arpeggio type
23