Pitch Controls-Transpose; Pitch Controls-Fine Tuning; Pitch Controls-The [Pitch Bend] Wheel; Calling Up Optimum Panel Settings-One Touch Setting (Ots) - Yamaha PSR-E463 Owner's Manual

Pitch Controls—Transpose
The overall pitch of the instrument (except for the
Drum Kit Voices and Sample Voice) can be shifted
up or down by a maximum of 1 octave in semitone
increments.
1
Press the [TRANSPOSE] button to call
up "Transpos" (Function 006).
2
Use the dial to set the Transpose value
between -12 and +12.
Pitch Controls—Fine Tuning
The overall tuning of the instrument (except for the
Drum Kit Voices) can be shifted up or down between
427.0 Hz and 453.0 Hz in approximately 0.2 Hz incre-
ments. The default value is 440.0 Hz.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up "Tuning" (Function 007).
3
Use the dial to set the Tuning value.
440.0Hz
Transpos
006
00
Tuning
007
007
Handy Performance Features
Pitch Controls—the [PITCH
BEND] wheel
The [PITCH BEND] wheel can be used to add
smooth pitch variations to notes you play on the key-
board. Roll the wheel upward to raise the pitch, or
downward to lower the pitch.
You can change the amount of pitch bend produced
by the wheel in the Function Settings (page 66, Func-
tion 008).
Calling Up Optimum Panel
Settings—One Touch Setting
(OTS)
Select a Song, Style or Groove by pressing the
[SONG], [STYLE] or [GROOVE CREATOR] button,
and then select Voice number 000 OTS (page 20).
This lets you automatically call up the optimum panel
settings such as Voice and tempo for the current
Song, Style or Groove.
PSR-E463/PSR-EW410 Owner's Manual
51