Arpeggio Settings; Synchronizing An Arpeggio To Song/Style/Groove Playback-Arpeggio Quantize; Holding The Arpeggio Playback Via The Footswitch - Yamaha PSR-E463 Owner's Manual

Arpeggio Settings

Synchronizing an Arpeggio to
Song/Style/Groove Playback—
Arpeggio Quantize
When you play the keyboard to trigger an Arpeggio
(page 22) along with Song/Style/Groove playback,
you'll need to play the notes with correct timing to
keep the Arpeggio in synchronization with the other
playback tracks. However, your actual timing may be
slightly ahead of or behind the beat (or both). The
"Arpeggio Quantize" function of this instrument will
correct any slight imperfections in the timing (accord-
ing to settings below), and then play back the Arpeg-
gio appropriately.
• No synchronization
• Synchronizing to 8th notes
• Synchronizing to quarter notes
Although the Arpeggio Quantize value is pre-pro-
grammed for each Arpeggio Type, you can change
the value manually.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up the "Quantize" (Function
044).
After a few seconds, the current Arpeggio Quan-
tize value appears.
3
Rotate the dial to select a value from
"OFF," "1/8" and "1/16."
• OFF No synchronization
• 1/16 Synchronizing to 8th notes
• 1/8 Synchronizing to quarter notes
56
PSR-E463/PSR-EW410 Owner's Manual
Quantize
044
1/8
044
2
Current value
Holding the Arpeggio Playback
via the Footswitch
You can set the instrument so that Arpeggio play-
back continues even after the note has been
released, by pressing the footswitch connected to the
[SUSTAIN] jack.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up "Pdl Func" (Function
045).
After a few seconds, the current pedal setting
appears.
3
Rotate the dial to select "Arp Hold."
Arp Hold
If you want to restore the footswitch function to
sustain, select "Sustain." If you want to use both
hold and sustain functions, select "Hold+Sus."
4
Try playing the Arpeggio with the foot-
switch.
Press the notes to trigger the Arpeggio, then
press the footswitch. Even if you release the
notes, Arpeggio playback will continue. To stop
Arpeggio playback, release the footswitch.
Pdl Func
045
Sustain
045
1
Current setting
045
2