Yamaha PSR-E463 Owner's Manual page 15

PSR-EW410
3
Insert the six new batteries, putting them in the
correct direction according to the illustration.
PSR-E463
PSR-EW410
4
Replace the compartment cover, making sure
that it locks firmly in place.
NOTICE
• Connecting or disconnecting the AC adaptor with batter-
ies installed may turn the power off, resulting in loss of
data being recorded or transferred at the time.
• Make sure to set the battery type correctly (page 15).
• When battery power becomes too low for proper opera-
tion, the volume may be reduced, the sound may be dis-
torted, and other problems may occur. When this happens,
make sure to replace all batteries with new ones or
already-recharged ones.
NOTE
• This instrument cannot charge the batteries. Use only the
specified charger device when charging.
• Power will be automatically drawn from the AC adaptor if an
AC adaptor is connected while batteries are installed in the
instrument.
 Setting the battery type
Depending on the battery type to be used, you may
need to change the battery type setting on this instru-
ment. To change the setting, first turn on the power to
the instrument, then choose the battery type you
would like to use. Alkaline (and manganese) batter-
ies are chosen by default. For details, refer to page
69, Function 064 (PSR-E463)/Function 065 (PSR-
EW410).
NOTICE
• Failure to set the battery type may shorten the amount of
the battery life. Make sure to set the battery type correctly.
 Checking the power status
You can confirm the power source at the left corner
of the display.
Only one of these is shown.
GrandPno
: The power is supplied from the AC adaptor.
: The power is supplied from the batteries.
NOTE
• When the AC adaptor is plugged in to the AC outlet, the bat-
tery icon does not appear even when batteries are inserted. In
this case, the power is supplied from the AC adaptor.
Remaining battery power indication
Indicates that the power will be turned off
immediately. When rechargeable batteries
are used, this icon flashes before the power
is turned off.
Indicates that remaining power is insufficient
for operation. Before the power runs out,
replace all the batteries with new ones, or
fully recharged ones (when using recharge-
able types). Note that the instrument may
not work properly, including unusually soft
volume and poor sound quality when
remaining power becomes low.
Indicates that the remaining power is suffi-
cient.
PSR-E463/PSR-EW410 Owner's Manual
Setting Up
15