The Functions - Yamaha PSR-E273 Owner's Manual

The Functions

The Functions settings provide access to range of detailed instrument parameters such
as Tuning, Split Point, Voices and Effects.
1
Press the [FUNCTION] button several
times until the desired item appears.
To decrease the Function Number by one, simul-
taneously hold down the [FUNCTION] button and
press the [-] button briefly. Simply pressing only
[+] or [-] button does not change the Function
Number.
2
Set the value by using the Number but-
tons or [+]/[-] buttons.

Function List
Func-
tion Function Name
Number
Overall
001 Transpose Transpos
Tuning
002 Tuning
SplitPnt
003 Split Point
Voice (page 15)
004 Volume M.Volume
005 Octave M.Octave
006 Chorus Depth M.Chorus
Style (page 17)
StyleVol
007 Style Volume
FingType
008 Fingering Type
S.ChdKey
009 Smart Chord Key
Song (page 16)
010 Song Volume SongVol
011 Song Melody MelodyVc
Voice
Display Range/Settings
-12–12
427.0Hz–453.0Hz
036–096 (C1–C6)
000–127
-2–2
000–127
000–127
1 (SmartChd)
2 (Multi)
FL7 (7 Flats b) – SP0
(No Key Signature) –
SP7 (7 Sharps #)
000–127
001–401
Press the [+] and [-] buttons simultaneously to
recall the default setting.
NOTE
• Press the [FUNCTION] button in the step 1 enables you to
use the VOICE/SONG/STYLE Category buttons as Num-
ber buttons.
3
To exit the Function settings, press one
of these buttons; [VOICE], [SONG] or
[STYLE].
Default Value
0 Determines the pitch of the instrument in semitone incre-
ments.
440.0Hz Determines the fine tuning of the pitch of the entire instrument
in approx. 0.2Hz increments.
054(F#2) Determines the Split "point"—in other words, the key that sep-
arates the Auto Accompaniment range and Voice (page 17).
* Adjusts the volume of keyboard performance when perform-
ing along with a Song or a Style.
* Determines the octave range for the Voice.
* Determines how much of the Voice's signal is sent to the Cho-
rus effect (see "Chorus Type" on page 22).
100 Determines the volume of the Style (page 18).
1 (SmartChd) Determines how to play the chord in Accompaniment Section
when playing with a Style.
SP0 Determines the Key Signature when the Fingering Type is set
(No Key to "Smart Chord." For example, if there are 2 sharps(#) on
Signature ) your music score, press the [+]/[-] buttons until "SP2" appears
on the display.
100 Determines the volume of the Song (page 16).
** You can change a Song's melody Voice to any other desired
Voice as follows:
1. Select a Song (page 14).
2. Select the desired Voice (page 14).
3. Press the [FUNCTION] button repeatedly to call up
"MelodyVc."
4. Press the [+] button.
"SONG MELODY VOICE" appears in the display for a few
seconds, and the selected Voice in step 2 replaces the Song's
original melody Voice. Selecting another Song will cancel the
Melody Voice change.
PSR-E273 YPT-270 Owner's Manual
Descriptions
21