Advanced Settings; Live Set (Settings Button) - Yamaha CK88 Owner's Manual

Advanced settings

Live Set (SETTINGS button)

From the [SETTINGS] button, you can configure and store the various settings of the currently selected Live Set
Sound. After editing, make sure to save the settings by pressing the [STORE] button.
The changes made here will be stored to the Live Set Sound.
Operation
1.
Press the [SETTINGS] button.
2.
Use the VALUE buttons and Encoder dial to select an item, and then press the [ENTER] button.
NOTE
You can also use the LIVE SET buttons [1] to [6] to select the item. The LIVE SET buttons [1] to [6] correspond to the items shown on the display
in order from the top. The buttons light up when this feature is available.
3.
Use the VALUE buttons or Encoder dial to change the value, and then press the [ENTER] button.
When the setting has been changed, the operation goes back to the previous screen for selecting the settings
item.
Sound
Function name
Part A Mono/
Part B Portamento
Part C
Unison
28
CK88 CK61 Owner's Manual
Description
Mono/Poly Selects whether to play the Part as monophonic (Mono) or polyphonic (Poly).
Default:
Type Determines how the portamento effect is used depending on how you play
the keys.
• Normal: The normal mono sound is played. Portamento is not used.
• Fingered: Portamento is used only when you play legato (playing a key while
• Full-time: Portamento is always used.
Default:
Portamento Time Determines the speed or time that takes for the portamento pitch change.
Settings:
Portamento Time Mode Determines the time standard for portamento pitch change.
• Rate: The pitch changes at the specified speed.
• Time: The pitch changes over the specified time.
Default:
Switch Enables or disables the Unison function.
Type Selects a Unison type.
• Multi Layer: The Part sound played on the keyboard is layered
• Harmonics: The Part sound played on the keyboard is layered at one octave
• Sub Harmonics: The Part sound played on the keyboard is layered at one
Default:
Volume Adjusts the Part volume layered with the Unison function.
Settings:
Detune Sets the amount of detuning between the Parts layered with the Unison
function. By layering the detuned sounds, you can achieve a chorus-like effect.
Settings:
Poly
still holding the previous key).
Normal
0–127
Rate
higher
octave lower
Multi Layer
0–127
0–127