Roland CX-500 User Manual page 24

3
Press the [ ] key to move to the setting screen, then
use the [ ] and [
4
Press the [ENTER] key to enable the up speed.
5
Press the [ ] key to exit the menu mode.
Settings for Cutting Quality
You can select whether speed is given priority in cutting, or whether cutting quality is emphasized.
This is also effective in preventing misalignment and motor errors when cutting heavy material.
1
Press the [MENU] key to enter the menu mode.
2
Press the [ ] key several times until the screen shown
at right appears.
3
Press the [ ] key to move to the setting screen, then
use the [ ] and [
4
Press the [ENTER] key to enable the cutting quality.
5
Press the [ ] key to exit the menu mode.
24
] keys to enter the up speed.
] keys to select the cutting quality.
UPSPEED
50cm/s 40cm/s
QUALITY
NORMAL
QUALITY QUALITY
NORMAL NORMAL HEAVY HEAVY
HEAVY NORMAL
Emphasis
on Quality
• When you want
cutting to be as
attractive as possible
• When heavy material
is loaded
Adjusting the Up Speed
Setting range:1 to 85 cm/s
(in incre-
ments of 1
cm/s)
Adjusting Cutting Quality
Setting range:NORMAL,
HEAVY, HI-
SPEED
HI-SPEED
Priority
on Speed
• When you want to cut
as rapidly as possible
(used together with
cutting speed)