Roland CX-500 User Manual page 10

4
Position the material so that its right edge lies over any of the grit patterns of the rightmost grit roller and its left edge
simultaneously lies over any other grit roller.
CX-500
Material Loading Position
10
Material
Grit roller
Material
The right-hand movable pinch roller can be moved within this range.
When loading material with a width other than one indicated above,
move the right-hand movable pinch roller.
Material Material
Material
with a with a
with a
width of width of
width of 48 in.
36 in.
and 54 in.
* Make sure the pinch rollers are positioned above the grit pattern.
(1*) Position of the pinch roller (middle) when using material with a width of 30 in. or 36 in.
(2*) Position of the pinch roller (middle) when using material with a width of 48 in. or 54 in.
Sensor
Load the material so that
it lies over the sensor on
the platen.
: Grit Roller
: Movable Pinch
Roller (Left)
24 in. (approx. 610 mm)
30 in. (approx. 762 mm)
36 in. (approx. 914 mm)
48 in. (approx. 1219 mm)
54 in. (approx. 1372 mm)
Material
Material with
with a
a width of
width of
18 in.
30 in. 24 in.
(2*)
54 in. (approx. 1372 mm)
With the material set in
place, make sure the
grit rollers are
positioned correctly.
Grit roller (Right)
: Movable Pinch
Roller (Middle)
: Movable Pinch
Roller (Right)
6 in.(approx.
152 mm)
12 in. (approx. 305 mm)
18 in. (approx. 457 mm)
Material Material
with a with a
width of width of
12 in. 6 in.
(1*)