Introduction - Fluke 725Ex Calibration Manual

Introduction

The information provided in this manual is for the use of qualified
personnel only. Do not perform the verification tests or calibration
procedures described in this manual unless qualified to do so.
This Calibration Manual provides the following information for the Fluke 725Ex
Multifunction Process Calibrator (also referred to as "the Calibrator" and/or "the UUT"):
•
Safety information
•
Specifications
•
Static awareness
•
Basic maintenance (cleaning, batteries, and fuses)
•
Equipment required for performance tests and calibration
•
Performance test procedures
•
Calibration procedures
•
List of replaceable parts
For complete operating instructions, refer to the appropriate Users Manual (located on
the CD-ROM shipped with the instrument).
The Calibrator contains parts that can be damaged by static
discharge. No procedure in this document requires the case to be
opened. If the case is opened, follow the standard practices for
handling static sensitive devices.
To contact Fluke, call one of the following telephone numbers:
•
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
•
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31 402-675-200
•
Japan: +81-3-3434-0181
•
Singapore: +65-738-5655
•
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
W
Warning
WCaution
1