Table of Contents
Advertisement
■[F 5] Display resolution
This function is used to change the pressure display resolution.
This can be used to prevent the digits from flickering on the display.
<Operation>
Press the
or
button in function selection mode to display [F 5].
Setting of display resolution
Press the
or
: Not selectable depending on the selected display units.
The display resolution selectable unit is MPa (only for ISE), kPa (only for ZSE), bar and psi.
(the units "bar" and "psi" are selectable only for models with the units selection function.
[F 0] Units selection function on page 23.)
Press the
button.
button to select display resolution.
Press the
button to set.
Setting of [F 5] Display resolution completed
Move on to setting of display resolution.
Return to function selection mode.
-30-
No.PS※※-OMM0003-G
Advertisement
Table of Contents
