Special Function Setting; F98 Setting Of All Functions - SMC Networks ZSE80 Operation Manuals

■Special function setting

■[F98] Setting of all functions
All functions can be set, one after the other.
<Operation>
Press the or button in function selection mode to display [F98].
Setting of all functions
[ALL] and the set value are displayed in turn.
Press the or
[oFF] (unused) selected
Press the button to
set.
Return to function
selection mode.
[F98] Setting of all functions completed
1: Setting of functions
button is pressed, the function steps in the "Order of Function setting" on page 37.
Every time the
Set using the or
Refer to each section for further details of the setting.
Press the button.
button to select all functions.
[on] (used) selected
After the change to
[oFF] (unused),
press the button
to set.
buttons.
Move on to setting of all functions.
Setting of each function
Return to function
selection mode.
Measurement mode
-36-
1
Press the
button for
2 seconds or
longer.
No.PS※※-OMM0003-G