■[F 8] Auto-preset function
When hysteresis mode is selected, the auto-preset function can calculate an optimum pressure value
automatically based on the on-going operation.
<Operation>
Press the
or
button in function selection mode to display [F 8].
Setting of Auto-preset
Press the
or
Press the
button during measurement mode to set the pressure.
Then press the
button again to change the set pressure, while the display is flashing.
Press the
button.
button to select auto-preset.
Press the
button to set.
Setting of [F 8] Auto-preset completed
Move on to setting of auto-preset.
Return to function selection mode.
-32-
No.PS※※-OMM0003-G