F0 Units Selection Function - SMC Networks ZSE80 Operation Manuals

■[F 0] Units selection function
Only the product with Units selection function can be set.
The displayed unit can be changed, and depends on the pressure range.
(Refer to the table below for the minimum indication unit).
(kPa/MPa units are available when the product does not have the units selection function.)
<Operation>
Press the or button in function selection mode to display [F 0].
Select the Display Unit
Press the or
Press the
Display unit and minimum setting unit
Unit ZSE80F
MPa 0.001
kPa 0.1
2
kgf/cm 0.001
bar 0.001
psi 0.01
InHg 0.1
mmHg 1
Press the button.
button to select the display unit.
button to set.
Setting of [F 0] Units selection function completed
ZSE80
0.001
0.1
0.001
0.001
0.01
0.1
1
Move on to select the display unit.
Return to function selection mode.
ISE80 ISE80H
0.001 (to 1.999)
0.001
0.01 (2.00 to)
1
0.01 (to 19.99)
0.01
0.1 (20.0 to)
0.01 (to 19.99)
0.01
0.1 (20.0 to)
0.1 (to 199.9)
0.1
1 (200 to)
-
-
-23-
-
-
-
No.PS※※-OMM0003-G