Table of Contents
Advertisement
■[F 9] Power saving mode
Power saving mode is selectable.
When the Pressure switch is left for 30 seconds with no key operation, it will enter power saving mode
(the decimal point and indicator LED (only with the switch output ON) will flash during operation).
<Operation>
Press the
or
button in function selection mode to display [F 9].
Setting of power saving mode
[ECo] and the set value are displayed in turn.
Press the
or
In power saving mode, any key operation will return the normal display. If there is no key operation for
30 seconds, the display will return to power saving mode (only in measurement mode).
In power saving mode, only the decimal points and indicator
LEDs will flash (the LEDs flash only when the switch is ON).
: The indicator LEDs will flash when the switch is ON, but it is not synchronized with the output.
Press the
button.
button to select power saving mode.
Press the
button to set.
Setting of [F 9] Power saving mode completed
Move on to setting of power saving mode.
Return to function selection mode.
-34-
No.PS※※-OMM0003-G
Advertisement
Table of Contents
