S
ETUP
Base Stations
Undocking the
terminal from the
base
NOTE
Dial-up and Ethernet
Connections
Creating a Dial-Up
Connection
26
VX 685/VX 690 I
NSTALLATION
To undock the terminal from the base:
1
Gently lift the terminal from the base.
Figure 16
Undocking the Terminal from the Base
When conducting customer transactions, you can remove the terminal from the
base.
The terminal allows for dial-up and Ethernet connections for full back-up
connectivity.
To create a dial-up connection:
1
Connect the telephone cable to the communication port on the base.
2
Route the other end of the cable directly to a telephone wall jack. This is a
direct connection and the line is dedicated to the terminal.
Figure 17
Direct Telephone Connection
G
UIDE
COM
ETH