VeriFone VX 685 GPRS Installation Manual page 33

Pairing with Another
Bluetooth Charging
Base Station
NOTE
Removing a Paired
Bluetooth Charging
Base Station
Removing a Paired
Device via Network
Control Panel of EOS
The terminal may be paired with additional Bluetooth Base Station once the
terminal is paired with a Bluetooth Base Station and initialized.
To pair a terminal with another Bluetooth Base Station:
1
Select Discovery on the terminal's Setup menu and press Enter.
Make sure the terminal is within five meters from the Bluetooth Base Station,
which must be powered on.
2
Select the appropriate base station name displayed on the terminal and press
Enter.
3
Select Yes on the Discover menu when Pair with Device screen appears.
The terminal and base station are then paired. The terminal makes the new
Bluetooth Base Station the default pairing device.
If everything is connected properly and the terminal is unable to go online, refer to
Troubleshooting Guidelines.
To remove a Bluetooth Base Station to which a terminal has been paired:
1
Navigate to the BT Devices menu.
2
Select the Bluetooth Base Station you want to remove as a pair.
3
Select Remove and press the Enter key.
The Bluetooth Base Station's name will disappear from the display when the
base station is removed.
To remove a paired device via Network Control Panel of EOS:
1
Select Bluetooth on the Menu.
2
Select Setup on the Bluetooth menu.
3
Select a paired device on the Setup menu.
4
Select Remove.
VX 690 BT/Wi-Fi Support
VX 685/VX 690 I
NSTALLATION
S
ETUP
33
G
UIDE