6
Press Enter key to start searching for a base station.
NOTE
Discovery is selected by default on the Setup menu.
There is a short delay as the terminal searches for the base station. The
message is shown on the terminal display.
The base station's name is displayed once the terminal discovers the
Bluetooth Charging Base Station.
Press the Bluetooth switch found in front of the Bluetooth Base if the devices are
NOTE
unable to find each other after two minutes. The three LEDs will blink after
pressing the switch indicating that the Bluetooth Base is discoverable.
CAUTION
Pressing the Bluetooth switch while there is an existing Bluetooth connection
may result in loss of connection, loss of modem profile, and loss of all modem
settings/configuration.
VX 690 BT/Wi-Fi Support
VX 685/VX 690 I
NSTALLATION
S
ETUP
31
G
UIDE