VeriFone VX 685 GPRS Installation Manual page 32

S
ETUP
VX 690 BT/Wi-Fi Support
Pairing the Terminal
with a Bluetooth Base
Station
Setting the
Connection
Information for a
Paired Device
32
VX 685/VX 690 I
NSTALLATION
Even after you have successfully searched for a Bluetooth Base Station using the
terminal, you will not be able to conduct Bluetooth transactions until you have
paired the terminal and the base station.
To pair the terminal with the base station:
1
Navigate to the BT Devices menu.
2
Select the base station's name and press the Enter key.
The BT Devices menu appears on the terminal screen if pairing is successful.
The name of the Bluetooth Base Station appears on the first line of the BT
Devices menu.
If everything is connected properly and the terminal is unable to go online, refer to
Troubleshooting Guidelines.
To set the connection information for a paired device:
1
Select Paired Device.
2
Select a device from the list.
3
Select either Ethernet, Modem, or Serial (this is for XPS019) on the BT Device
Port.
G
UIDE