File Association - Barco ACS-2048 User Manual

4. Operation
Using the Main Menu
cáäÉ=^ëëçÅá~íáçå
From the System Menu, select File Association to display the File Association Menu:
F I L E A SS OC I A T I O N
> Inpu t 1
Figure 4-38. File Association Menu (sample)
The File Association Menu enables you to associate an input configuration file with each
of the eight inputs. The "associations" listed on the menu tell the system which file to use
when an input is selected from the front panel. Please note:
•
•
To create a file association:
•
•
•
Refer to the
on the Auto Acquire mode.
64
Example: The Status Menu is currently displayed. When you
press TEST PAT, the Test Patterns Menu is immediately displayed.
~
When Menu Context is OFF, menu context does not change when an
Input or the TEST PAT button is pressed.
Inpu t 2
Inpu t 3
Inpu t 4
Inpu t 5
Inpu t 6
Inpu t 7
Inpu t 8
By default (and after a system reset), file associations are 1:1 with the input
numbers themselves (e.g., input 1 = 1, input 2 = 2, etc.). However, any
association can be configured.
On the Save Config and Recall Config menus, when you select a file number
and save or recall an input, the system automatically creates a file association,
using the selected file number. For example, if you save input 1 with file number
10, that association will be listed on the File Association Menu.
Scroll to the desired input line and press SEL.
Use the ADJUST knob to choose the desired file, and press SEL to accept. This
file will now be used "first" when that input is selected from the front panel —
whether or not In Auto Acquire is ON.
Repeat to configure additional file associations.
"Understanding Auto
1
2
3
4
5
6
7
[N/A]
Acquire" section on page 70 for additional information
ACS-2048 • User's Guide