User Preference - Barco ACS-2048 User Manual

Note that the ACS-2048 measures the internal temperature for an "over-temp" condition
every 5 minutes. If the system's internal temperature exceeds 122° F (50° C), the following
message appears:
O VE R T EM PE RA T U RE
Figure 4-36. Over Temperature Warning
To clear the message and continue operations, press ESC.
rëÉê=mêÉÑÉêÉåÅÉ
From the System Menu, select User Preference to display the User Preference Menu:
US ER P RE FERENCE
> Aut o Inp ut Save
Figure 4-37. User Preference Menu (sample)
The following functions are available:
•
•
•
ACS-2048 • User's Guide
Co ntact f actory if
conditio n persist s.
ESC = Continue
Note This message is a warning only, which does not prevent the
operation of the ACS-2048. If this message appears, it is
recommended that you contact Barco Customer Service.
All Inputs Sel
M e n u C o n t e x t
Auto Input Save — When enabled, the system automatically saves the selected
input after it has been acquired for the first time. The field has no effect if the Auto
Acquire mode is OFF.
All Inputs Sel — This preference tells the system to allow (or disallow) the
selection of inputs that do not have a valid sync signal detected.
~
When ON, you can select inputs that do not have valid sync (and are not
backlit).
~
When OFF, you cannot select inputs that do not have valid sync, and the
"Invalid Selection" message will be displayed if you attempt to do so.
Menu Context — This preference determines the behavior of certain ACS-2048
menus. The following conditions apply:
~
When Menu Context is ON, regardless of the menu currently being
displayed, menus automatically change their context when an Input or
the TEST PAT button is pressed.
Example: The Status Menu is currently displayed. When you
select a different input, the Input Menu is immediately displayed for
that input.
4. Operation
Using the Main Menu
O F F
O F F
O F F
63