Barco ACS-2048 User Manual page 56

4. Operation
Using the Main Menu
p~îÉ=lìíéìí=`çåÑáÖ
From the Output Menu, select Save Config to save the current output configuration. A
message is briefly shown, after which the system returns to the Output Menu.
Figure 4-21. Saving Output Configuration Message
Please note the following important points regarding the output configuration file:
•
•
Figure 4-22. Save Output Configuration Prompt
56
Savin g Output Co nfig
When you perform the Save Config function, all configuration parameters from
the Output Menu are saved in non-volatile memory. If you do not perform the
function, output data will not be restored upon the next system power up.
If you make a change in the Output Menu, and attempt to exit the menu (by
pressing ESC or TEST PAT) without saving changes, the system displays the
following prompt:
S a v e O u t p u t C f g ?
< S E L > = Y e s
< E S C > = N o
~
Select Yes (SEL) to save changes.
~
Select No (ESC) to continue operation without saving the changes.
ACS-2048 • User's Guide