Barco ACS-2048 User Manual page 102

_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
Remote Commands
fpbi
•
•
•
•
•
fpq^q
•
•
•
fs`olm=
•
•
•
•
•
fsm^k=
•
•
•
•
•
il`hlrq
•
•
102
Description: Selects the specified input as the current input to display. This
command will perform the valid sync check, route the input, recall video if saved
or acquire source if not saved. The selected input's file association is updated and
the settings in the input configuration file are applied if the –f (file) parameter is
specified.
Command Format: ISEL -i (input) -f (file)
Parameters:
-i (input):1 - 8
-f (file): 1 – 64 (optional)
Query Format: ISEL -?
Query Response: ISEL -i (input)
Description: Query only command for the input status type and format.
Query Format: ISTAT -?
Query Response: ISTAT -t "(input type)" -f "(input format)"
Description: Input Vertical Crop
Command Format: IVCROP -i (input) -h (height)
Parameters:
-i(input): 1 - 8
-h(height): In lines
Query Format: IVCROP -i(input) -?
Query Response: IVCROP -i(input) -h(height) --min (pos min) -- max (pos max)
Description: Input Vertical Pan
Command Format: IVPAN -i (input) -p (pan)
Parameters:
-i (input): 1 - 8
-p (pan): In pixels
Query Format: IVPAN -i (input) -?
Query Response: IVPAN -i (input) -p (pan) --min (active min) -- max (active
max)
Description: Controls the lockout mode of the front panel. When enabled, the
keys and menu will be deactivated.
Command Format: LOCKOUT -m (mode)
ACS-2048 • User's Guide